Comment calculez-vous le budget énergétique des caméras IP PoE ? (2024)

When implementing PoE, understanding the standards and device classes can help you to select the right technology for various applications. For instance, 802.3af is commonly used for low-power devices like IP cameras and VoIP phones, offering up to 15.4W. The IEEE 802.3at (PoE+) standard, providing up to 30W, is suited for slightly more demanding devices, including dual-band wireless access points and video phones. Lastly, the IEEE 802.3bt (PoE++), which can deliver up to 90W, caters to high-power applications such as digital signage, PTZ cameras, and remote computer terminals. Each standard supports a range of devices by offering different power levels, ensuring flexibility and efficiency in network design and implementation.

Texte traduit

First we need to check power consumption of each netwok equipment (Wireless bridges, WiFi routes etc). How many watts do equipment require to operate by PoE? After we need to check ho many maximum watts a network switch can provide. For instance if L2 48 port switch has available 370W. for PoE. Those means we can supply only 24 PoE devices operating in class 0 (15,4W).

Texte traduit

You should always add a buffer reserve of power budget to keep switch heat down. The positive is it can possibly extend the life of your networking equipment and increase ROI.

Texte traduit

Calculating the total power consumption of your PoE IP cameras and other PoE devices, such as access points, phones, or sensors, is a crucial step in network planning. To determine this, multiply the number of devices by their maximum power consumption, typically provided by the manufacturer or indicated by their PoE class. For instance, if you have 10 PoE+ Class 4 IP cameras, the total power consumption would be 10 x 30W = 300W. This calculation ensures that the power supply, whether from a PoE switch or injector, meets the demands of all devices on the network. Additionally, utilizing a PoE calculator tool can simplify this process, providing a quick and accurate assessment of your power needs.

Texte traduit

After identifying PoE standards and device classes, the next critical step is assessing the total power capacity of your PoE switch or injector. To ascertain this capacity, you must determine the power budget, which represents the maximum power the device can allocate across all its PoE ports. Information regarding the power budget is typically found on the device's label, datasheet, or user manual. For instance, a PoE switch with a 370W power budget can distribute up to 370W across its ports, enabling the support of multiple devices according to their power requirements. This step ensures that the network infrastructure is adequately powered and can sustain the operational needs of all connected PoE devices.

Texte traduit

In my case I suffered it. Depending on the distance and the camera you need to consider it.You'll go crazy if the camera doesn't work. After thinking about it we considered to insert a poe injector to test it and it works!!!

Texte traduit

By following the networking standard for ethernet distance, a maximum of 100 meters from source to device, you will not have to worry about power loss on your cable.

Texte traduit

(modifié)

In exploring the expansive capabilities of Power over Ethernet (PoE) beyond its conventional realms, one intriguing application emerges in the domain of agriculture, specifically in smart farming. Imagine leveraging PoE technology to power and connect a network of sensors spread across a farm. These sensors can monitor various environmental conditions such as soil moisture, temperature, and humidity, providing real-time data to optimize irrigation, fertilization, and pest control. By integrating PoE with renewable energy sources like solar panels, farms located in remote areas without direct access to the electrical grid can still benefit from advanced IoT technologies.

Texte traduit